Actylic Bathtubs vacuum forming machine by electricity or oil

• Min. Order:1

Specification
1.The heater oven can be used by electricity or oil;
2. Used the FRP mould;

Heating oven
1.Room size:6500*3500*1100mm;
2.Liner is 201 stainless steel plates; the outer wall is cold plate;

3.Oven wall thickness:100mm, filled with insulation foam;
4.Heating:electric heat tube, the upper and lower double-sided heating;
5.Temperature: multi-sensor automatic thermostat;
6.Temperature range: room temperature to 399 degrees;
7.Power 45KW+45KW=90KW;
8.Movable blocking door can divided the oven into two parts;

Swimming pool forming platform
1.The largest forming size:5900*2400mm;
2.Transmission: hydraulic;
3.Balance error:3mm;
4.Operating modes: command-style semi-automatic;
5.Transmission of plastic sheet: Directive mechanical transmission;
6.Up and down travel limit:1m;
7.Clamp method: grouping manual rapid clips;

Spa forming platform
1.The largest forming size:2400*2400mm
2.Transmission: hydraulic;
3.Balance error:3mm;
4.Operating modes: command-style semi-automatic;
5.Transmission of plastic sheet: Directive mechanical transmission;
6.Up and down travel limit: 1m;
7.Clamp method: grouping manual rapid clips;

Vacuum pump：100 liter rotary vane vacuum pump or water ring vacuum pump

Vacuum tank
1.Volume: Recommendation 20 cubic meters, horizontal layout;
2.Maximum negative pressure: -0.9;
3.Automatic vacuum control;
4.Vacuum time:12 minutes;

Hydraulic system
1.7,5P hydraulic station:1pc
2.Safety limit load: 12 tons

3.Hydraulic rod: two pieces each elevating platform;
4.Diameter of piston rod: 80mm;
5.Hydraulic weight transfer;
6.Automatic pressure maintaining , adjustable pressure;